The Homeowner explained that he had cellulose insulation installed over his existing batt insulation and the can lights were never air sealed and covered. He noticed that in certain areas of the home the temperature was not consistent with the rest of the home. Mold was also an issue in the attic space causing deep staining along the roof deck. The soffits were blocked with previously installed cellulose insulation causing no air exchange in the attic and allowing humid stagnant air to circulate throughout the attic and not escape. Air from the conditioned home was leaking through the unsealed can lights wasting energy to the unconditioned attic. Baffles had not been installed prior to the cellulose being installed causing the soffits to be blocked with insulation. The Homeowner chose to have the problem fixed because mold was a concern for him to have within the home and he also wanted to lower his energy consumption. He also didn't want to be paying for energy just to lose it to heating and cooling his attic space. The Homeowners biggest concern with the problem was spending money for energy to heat and cool the home just to lose a percentage of it to a space that is not occupiable.

  The homeowner chose TCI Remediation to do the work because we gave him multiple solutions that would fit his price range and make an impact. We treated the mold within the attic and cleared all the soffits and installed baffles to allow proper airflow within the attic. We then dug up the can lights under all the insulation and put covers over top of them which were then air sealed. We did a cap off with cellulose insulation over top of his existing insulation to get him from R-38 to R-60. It was a challenge to locate the can lights under all the blown-in insulation because they had not been marked for their location. Roofers were present removing the shingles and sheathing above the sun room so we had to wait for access before we could blow insulation in that portion of the attic. We used TruSoft Stabilized Cellulose, TiteShell Can light covers, ZypFoam and SilverGlo Polystyrene foam board for insulation. We also used a combination of Mold X2 and Mold X2 Botanical product to remediate. The homeowner now has a mold free attic and has a better insulated energy efficient attic and is more comfortable year round.

Insulation Installation and Home Comfort

Are areas in your home freezing cold in the winter and super-hot in the summer? Or just looking to improve your homes energy efficiency and comfort? the attic should be at the top of your priority list. Insulation and air sealing in the attic have a dramatic effect on the home's overall energy performance, and upgrades in this area can lead to significant savings on heating and cooling costs. 

Most homes in Michigan have R-30 (just under 10 inches) which was the previous code. With increasing to the current code of R-49 (approx. 15 inches) our homeowners experience significant savings on their heating bills and savings on their electric bills during the summer months when air conditioning is used. Think of your home like a large bag surrounding your living environment. If you turn your furnace or air conditioning off how long will the hot or cold air stay within your home? The more thermal barrier to the outside environment you have the less your equipment will run saving you money and increasing comfort

How the attic impacts home comfort

Cellulose insulation can be installed over existing insulation without interfering with your storage area

About 50% of energy costs are typically attributed to heating and cooling, making it one of the biggest expenses for many homeowners. The attic has a major impact on home efficiency for several reasons:

• Air leaks and drafts between attic and living space
• Air leaks and drafts between attic and outdoors
• Poor or incorrect ventilation
• Insufficient attic insulation
• Uninsulated ductwork in the attic

Best methods for improving attic efficiency

• Air sealing: The first step to improving attic efficiency is air sealing. Your attic is full of gaps and cracks that allows conditioned air to escape from the living space into the attic and unconditioned air to enter from the outside. Sealing these air leaks helps to keep your attic isolated from the outside and keeps conditioned air inside your home.
• Attic insulation: Many attics are lacking proper insulation, which is one of the biggest causes of energy waste and uncomfortable rooms. Raising attic insulation to proper levels prevents heat transfer between the attic and the living space, meaning your HVAC system will run less because conditioned air is being contained in the areas you want to heat and cool.
• Ductwork services: If you have ducts in your attic, they are affected by the extreme hot and cold temperatures that occur in that space. When you try to send cold air through hot ducts or vice versa, the air in the ducts is heated in summer (and cooled in the winter), making it difficult to heat or cool your home. Having ducts in attics is extremely inefficient, which is why duct sealing and duct insulation are smart upgrades for homeowners with ductwork in the attic.

Where Does Mold Grow?

First, it's important to know where to look. Mold tends to prefer cold, dark, and moist spaces. You probably won't find it in your living room, but your attic and crawlspace are much more likely hiding spots.

Mold will grow in places with a lot of moisture, such as around leaks in roofs, windows, or pipes, or where there has been flooding. Mold grows well on paper products, cardboard, ceiling tiles, and wood products. Mold can also grow in dust, paints, wallpaper, insulation, drywall, carpet, fabric, and upholstery.

And that's not all. You might also find it in doorways, windows, heating and air conditioning systems. It enters your home either through the air or by being attached to other moldy items like old shoes or newspapers. Once it's there, it's difficult to get rid of.

Signs of Mold

The health risks of mold make looking for early signs that it's growing into your home absolutely crucial. If you see even subtle signs, it might be time to call for professional help to take care of the remediation. Some of these signs include:

Irritated lungs and breathing, similar to allergy symptoms.

A musty smell in the home or areas of the house.

Visible mold, both black and with potentially colored spots.

Water leaks, past flooding, or persistent condensation.

Rust and warping of materials due to humidity.

Most of these don't necessarily point directly to mold growth. They just point towards an environment that encourages this growth. That's why simply looking for them doesn't tend to be enough. A more comprehensive inspection is vital to making sure you know about any potential problems.

Can Mold Harm Humans?

The problems with mold are much more than just an inconvenience. Studies have repeatedly shown the many health risks that the spores can bring with them. In fact, mold has been linked to anything from chronic coughs to allergic reactions, skin rashes, red eyes, and more. In some cases, it can get worse.

The reason mold removal services tend to be so important is what mold does to the health of some of the most vulnerable people around us. Most are particularly dangerous for those of us with autoimmune disorders, chronic lung disease, strong allergies, or asthma. And of course, it's worse for infants, children, and the elderly, whose immune systems might not be able to fight against it.

The lesson is clear: you don't want and probably can't afford to have mold in your home. Unfortunately, due to its favorite locations, it could also be difficult to find at times. A thorough inspection can help you find it, but looking out for early growth signs is also important.

Mold Prevention Tips

Ideally, you never let it get to a point where removal becomes a necessity. In the interest of your health and your home's value, you want to make sure that you can prevent rather than remediate the mold. A few tips can help you achieve that goal:

Keep the humidity in your home low, preferably under 40%.

Regularly check your home, particularly the potential problem spots mentioned above, for growth and take care of it early when needed.

Don't let wet areas stay wet. Dry them to make sure they don't become a hospitable environment.

During renovations, invest in mold-resistant drywall and sheetrock to create a less preferable environment.

Regularly clean your roof gutters to avoid any potential leaks or water entering the home in hidden spots.

Clean mold problems immediately, rather than letting it grow into a more significant problem.

It pays to be proactive. Still, you can't be expected to know every square inch of your home. In addition to these general tips, it pays to have regular mold inspections, both for your peace of mind and to be able to detect issues before they become major problems.